Do It Yourself

DIY Fire Pit


What is better than sitting around a crackling wood fire pit with your friends this winter? 

Don’t have one?  Not for long, we are going to teach you step by step how to build an in ground fire pit in your own backyard.

do it yourself fire pit

What you will need:


  1. Brick hammer
  2. Bucket
  3. Concave jointer
  4. Concrete float
  5. Cordless drill
  6. Level
  7. Margin trowel
  8. Mason’s trowel
  9. Safety glasses
  10. Spade
  11. Tuckpointing tool
  12. Wheelbarrow


  1. 120 face bricks
  2. 25 firebricks
  3. Can of spray-paint
  4. 92 cm (Length) 20cm (wide) cardboard concrete form
  5. 122 cm (Length) 20cm (wide) cardboard concrete form 
  6. Five x 40kg bags of Type N mortar mix 
  7. One 2 Litre bucket of refractory cement (sold at a brickyard)
  8. Ten x 40kg. bags of concrete mix 
  9. Two x 3-meter lengths of 3/8-in. rebar

Overview:  How to Build a Fire Pit 

Getting Started on Building your Fire Pit

Fire pits have become very popular of late and it doesn’t take a rocket scientist to build one.  Most importantly the fire pit must be solid, safe to use and last decades, so let’s do a good job😉

This project will only take a few days and as you follow the step by step instructions you will see why.  The first step is pouring the footing and letting it set, then you will start mortaring the bricks into place.

Step 1

Before Digging, make sure that you do not damage any underground electrical wires or water pipes.

Make sure that the location is not too close to buildings and overhanging trees. When the wind picks up, you do not want to burn anything down!

Step 2

Mark Out the Fire Pit

Dig out a dedicated space in your yard for the fire pit base by following the dimensions below:

  • A 92cm – diameter in ground fire pit creates enough room for a good fire while keeping everyone close enough to chat and be social.
  • To make measuring the pit and pouring the concrete footing easy, we used two cardboard concrete form tubes (purchased from a concrete supply company).
  • Carefully bend and screw the two ends together to create a 92cm – diameter circle and use the other to bend and make a 122cm – diameter circle.
  • Set the larger form in position and spray paint around it. Dig a hole about 20cm deep and 8cm larger in diameter than the form.

mark out fire pit

Step 3

Level the Pit

  • Dig the soil out about 20cm deep for your fire pit base and check that the bottom of the hole is level.
  • Now compact the soil to remove any high spots.

level fire pit

Step 4

Stake the Forms to keep them in place while you pour the footing for your fire pit base.

  • Place the larger of the two concrete forms in the hole you have dug and place the smaller of the two concrete forms on the inside.
  • The concrete footing creates a stable base for the pit walls and will keep the sides from cracking as the ground moves over time.
  • Mix up Ten x 40kg bags of concrete mix according to the manufacturer’s directions.
  • If the forms are not completely round, reposition the stakes slightly.

stake the forms fire pit

Step 5

Add the Rebar

  • Bend rebar into half-circles for this circle fire pit and tie them together with wire to make a ring.
  • Fill in between the forms halfway then press the ring into the concrete for strength and stability, making sure the rebar circle does not touch the sides of the forms.

add rebar to fire pit form

Step 6

Finish the Footing

  • Fill the forms to the top with the remaining concrete and tap the cardboard concrete mould tubes gently with a sledgehammer until the concrete mix is level and smooth.
  • Let the concrete set overnight then remove the forms.

finish fire pit footing

Step 7

Dry-Set the Firebrick Liner

  • Your normal clay brick can crack at high temperatures, so we are going to use firebricks to line the inside of the fire pit walls. (also called “refractory” brick as used in pizza ovens) – Firebrick is a dense brick that’s made to withstand high temperatures.  They are a bit more expensive but will last for many years.
  • You will need 25 firebricks for a 92cm diameter pit.
  • Pack the firebricks vertically around the mouth of the firepit, flush with the footing and mark the position behind every brick, with a pencil.
  • Firebricks are tougher to split than your normal building bricks. “Soldiering” the brick minimizes the splitting and lets you easily accommodate the curve of the pit.
  • You will need to split four firebricks in half, which you’ll place across from one another around the pit to create draw holes, to allow oxygen in for your fire.
  • Once you have split your firebricks, dry-set them in place on top of the footing.

dry set the firebrick

Step 8

Mortar the Firebrick

  • We are going to use a 2 Litres of refractory cement to mortar the firebricks, as it can withstand high heat.
  • You can buy refractory cement remixed in a bucket and has a thick consistency.
  • Work with four bricks at a time and trowel the cement on thin then position your bricks. A margin trowel makes it easier to scoop cement out of the bucket.
  • REMEMBER to leave four gaps in four opposite points around the ring to insert your half bricks. These gaps are the “draw holes” that are going to feed your fire with air.
  • Continue around the circle making sure that your levels are straight as you go.

mortar the firebrick

Step 9

Create Air Holes

  • The top of the half brick must be level with the tops of the firebricks so you will have to apply mortar and prop the half brick into place until the mortar has set. 
  • Use another brick to hold it up and once it has set pull the loose brick out.

create air holes in fire pit

Step 10

The Outside Walls can now be completed using Face Brick

  • We used face brick also known as building bricks to complete the exterior of the fire pit walls. 
  • You will need 80 face bricks for an outer layer packed horizontally.
  • The face bricks can easily be split in half with a brick hammer.  Half bricks work better to accommodate the curve of the pit walls.
  • Mix your Five x 40kg bags of Type N mortar mix as per manufacturer’s instructions then you are going to lay three courses of face brick and mortar.
  • Face bricks are smaller than firebrick so keep in mind that the total height of three stacked face bricks will determine the width of your mortar beds between courses.
  • It’s always better to dry-set the face bricks by marking on the fire bricks to be sure that the third course of face brick will be level with the top of the firebrick.

Step 11

How to Split 80 Face Bricks in Half

  • Firstly, put your gloves on, you are going to need your hands “in working order” to finish your fire pit😊
  • Hold the brick in the palm of your hand, now give it a solid tap in the centre on the outer edge.
  • Tap, split, repeat.

split brick

Step 12

Set the Face Brick

  • Lay a 5cm thick bed of mortar right on top of the footing, to keep your mortar joints a reasonable width between courses.
  • Take a 15-minute break to let the mortar set, then smooth off the top.

set face brick fire pit

Step 13

Work in Sections

  • Working in sections applying fresh mortar on each section before securing the face brick into place.
  • Check the level of each section, tap down the bricks as necessary, making sure the face bricks are aligned with the outer footing.
  • Staggering the joints between sections increases the overall strength of the pit wall.

lay fire pit brick

Step 14

Smooth/Strike the Joints

  • Once you have finished each section of face brick, use a jointer to smooth the joints before the mortar dries too much.
  • If you press your finger into the mortar and an indentation remains, the mortar is ready for smoothing.  This will give the outer wall a polished look.
  • REMEMBER to leave the draft holes open as you mortar the face bricks into place!

strike mortar joints fire pit

Step 15

Finish Off the Top Lip

  • Firstly, Mortar the top of the brick caps.
  • Finish the pit with a matching row of regular face brick placed horizontally on their sides.
  • You will need about 40 face bricks for this cap.
  • Mortar each brick on the outside edge and press it into place.
  • For a more sophisticated look, you can use natural stone, to change the look and feel😉

mortar the fire pit brick caps

Step 16

Fill Gaps

  • Check your joints and add a small amount of mortar to fill any gaps.
  • Strike the joints with a concave jointer for a smooth look once all the bricks have been mortared into place, checking the level as you go.

fill gaps in fire pit brickF

Step 17

Finished DIY Fire Pit

  • You will want to wait about a week for the cement to cure properly before making a fire in your new pit.
  • Only thing left to do now, invite all your friends over, for the fire pit lighting ceremony next weekend.
  • Enjoy and please send us pictures of your masterpiece, we would love to see them!

do it yourself fire pit

Our Story

Build it Hermanus – Building Materials and more to make home building simple!

Build it Hermanus are the Market Leaders of Hermanus Building Materials, Construction Materials, and DIY for the Hermanus local Community.

In 2015, following the 12-year success story of Build it Gansbaai, the Burger family embarked on another adventure by expanding their family operations, with the purchase of prime property, in Hermanus.

By applying the same expert advice, industry knowledge, and excellent customer service, Build it Hermanus has become the flagship of Hermanus building supplies, setting a new standard in the building materials arena.Providing a full solution, to build a home from planning to completion! Their main focus directed on the building of urban and township housing as well as all your Do-It-Yourself (DIY) home improvements. With the Burger’s core values of Family, Entrepreneurship, and Passion at the core of everything they do, Build it Hermanus is part of a group of 374 independently owner-run, retail stores across South Africa that has been supplying building materials and serving their communities for 32 plus years.

The Burger family believes that it is their duty and responsibility to give back to the communities that support them. One of the ways they do this is through ongoing sponsorship of under 13 soccer development in Hermanus. “By nurturing a healthy lifestyle through sport, we are building a better future for our youth.” Other community projects they also proudly participate in are school renovations and the sinking of water boreholes. Build it is a division of the SPAR Group Limited South Africa. A voluntary trading group of individually owned retail stores with more than 10 000 employees across the group, we currently have stores in South Africa, Namibia, Swaziland, Lesotho and Mozambique with plans to expand into Botswana and Zambia in the near future. We view ourselves not only as a supplier of materials, but as a partner to our valued customers in accomplishing their building or renovating projects.


New Management

Growing up learning the business and connecting with their local communities, Dylan and Clayden Burger have taken over the management of Hermanus Build it, from their parents Eddie and Silvana Burger.
With new vision and fresh ideas, Dylan and Clayden Burger are the ones to watch!
Both these brothers have a passion for the business and the people involved and will continue to offer the Hermanus community the same service excellence they have become accustomed to over the years.
But wait there’s more…


Build it Online

Order all your building supplies, construction materials and DIY products, online today! What is the most precious commodity known to man? Time of course!

As we know life happens, something unexpected pops up, you reach to stop go just as the light switches over to red. You are late! Do not stress, whip out your phone while you wait, log onto the buildit-store, place your order online and choose your payment method. You can now have all your building supplies delivered directly to your home or construction site.

It just doesn’t get any easier than this.

The Covid 19 lockdown took us all by surprise, many companies have closed their doors while others are still clawing their way back, fighting for survival.

There has never been a better time than now to take your business online. Globally there are currently 4 Billion people online, and there will be an estimated 8 Billion people online by 2025. Ecommerce is the Future!

I remember Robert Kiyosaki said, “2020 is about survival but those who can exploit it, will manage to achieve unparalleled heights this year too! The second half of 2020 is the challenge of entrepreneurial strength.”

This is a reality Dylan and Clayden Burger quickly realized and took the necessary measures to ensure the survival of their legacy.

To ensure you have a stress-free online shopping experience, we will have a look at the most common Frequently Asked Questions, to set your mind at ease.

Is online shopping safe?

Yes. We have taken every precaution to ensure your personal details are safe with us. All sensitive information you provide is encrypted using industry-standard Secure Sockets Layer technology, and we utilise a leading South African payment processor.

What is Online Security?

Online Security is a Certificate Authority that essentially secures the Build it website by validating security certificates with our affiliates to ensure that our connection both to and from are secure at all times.

What are the requirements for a Password?

Build it attempts to make your online shopping experience as secure as possible. The password entered on registration must be alpha-numeric (that is, a mix of letters and numbers) and must be a minimum of 6 characters in total. Your password needs to be a mix of 1 uppercase, 1 number and 1 special character.

Will my Password expire?

For your convenience we have maintained a static password that will not expire. However, should you wish to change your password, you can either change it in your ‘My Account’ section or reset it following the password reset process.

How do I reset my Password?

There is a “Forgot Your Password” link on the login page. You will be prompted to enter an email address to send a password reset email which will allow you to reset your password. Please ensure that you enter the email address you registered with. If your email address has changed, please contact us on

How can I see how much stock is available?

We do our best to source stock even if it is low, but there may be cases where we will need to contact you as this may lead to extended lead times. Unfortunately, due to the nature of our business, we cannot guarantee the stock indicated on the site is in-store. However if you want to confirm the quantity available, it’s best to contact us on

Can you guarantee stock?

As we are competitively priced and our stock sells on demand, we cannot guarantee stock. However, we will try our best to source the items for you. We will be in contact with you should we encounter any problems with stock.

Do you Deliver?

Yes, we do. We deliver in Hermanus and the greater Overberg / Overstrand area for a delivery fee.

What are Cookies?

A cookie is a piece of information that is deposited on your computer’s hard drive by your web browser when you use our computer server. The cookies enable us to recognise you and give us information about your previous visits. Most browsers accept cookies automatically, but usually you can alter your settings to prevent automatic acceptance. If you choose not to accept cookies, this may disable some of the features of our website. The information that we collect is anonymous and not personally identifiable. It does not contain your name, address, telephone number or email address.

What internet browsers are supported?

Our website is built to work across all mainstream Internet browsers. But for optimal browsing experience, we recommend:

Internet Explorer – Version 10 and later (Windows only)
Firefox – Version 24 and later (Windows, Android & Mac)
Google Chrome – Version 30 and later (Windows, Android & Mac)
Safari – Version 6 and later (Mac & iPhone only)

Is the Online Build it Store compatible with SMART devices?

Yes, as our website is designed to be used across current mainstream mobile devices, such as tablets (e.g. Apple iPad or Samsung Galaxy Tab) or mobile phones (e.g. Apple iPhone, Samsung Galaxy S range, Microsoft Lumnia, or Blackberry Q10).

Please visit our website (, for an in-depth look at our policies and terms and conditions.

Are you ready?

Here is a quick overview on how easy it is to start shopping online, Now!
Log onto – Notice the small lock at the top left corner of your screen next to your URL? This means your account is secure and protected.
Click on Create an account
Create a Username and Password – Your password needs to be a mix of 6 characters: 1 uppercase, 1 number and 1 special character. Keep this information in a safe place.
Log into your account and complete your personal details: Name, Delivery Address, preferred method of payment, etc.

That’s it, you are done!

Lets shop.